switchBoxD DIN
£43.00
5 in stock
switchBoxD DIN
- Control two electrical circuits with your smartphone! (2x 1.1kW)
- Two output modes: independent and push-pull
- Schedule and astronomical clock (control at sunrise and sunset)
- Measurement of power and electricity consumption!
- Connect up to 2 buttons and/or 2 DC/AC control signals (motion detector, smoke detector, central button)
- Mounting on a DIN rail in an electrical switchboard
- Illuminated, color front panel of the DIN driver with an additional control button
Additionally:
- Possibility of creating a central wired button and a wireless WiFi button with the actionBox module
- Ability to pair μWiFi remote controls (uRemote, sRemote, inBox)
- Wireless automation combined with sensors for temperature, rain, air quality, wind, etc.
wBox app:
Smartphone control!
Control two electrical circuits locally and remotely from anywhere in the world using your smartphone. Create scenes and groups that will allow you to control multiple BleBox controllers at the same time.
With the “switchBoxD DIN” you can turn off, turn on or turn on up to two 1150W devices for a given time
switchBoxD DIN can also be used in the push-pull mode to, for example, switch the windings (gears) of a fan.
Schedule and astronomical clock
The schedule with the astronomical clock function allows you to control at a given time and at sunrise and sunset based on geographical location.
For example: set the lights in the garden to turn on automatically after sunset and turn off at 23:59 to save electricity.
Power and energy consumption measurement!
With the WiFi controller “switchBoxD DIN”, you can measure the total power of two electrical circuits!
Thanks to historical data and interactive charts, you can see how much electricity your devices used in individual hours or minutes.
Wired and WiFi buttons
Smart-home is not supposed to take away the possibilities, but to expand them, so you can connect 2 independently operating buttons to the “switchBoxD DIN”.
You can use bell (monostable) or candlestick (bistable) buttons. You can freely configure them in the wBox application!
If there is no proper wiring, then with the help of modules from the actionBox family, you can create buttons without running wires! actionBox family controllers send commands via WiFi network
Signal control
A smart home should think for you, so do not control manually, connect the outputs of smoke sensors, motion sensors or alarm control panel outputs to the inputs of the “switchBoxD DIN” controller so that the control actions will take place automatically.
You can connect any 12-230V AC / DC signal and configure the actions to control this or any other BleBox device.
Voice control
In combination with Google Home and Amazon Alexa voice assistants, you can control devices with your voice.
Give a voice command to your smartphone, Google speaker or Alexa.
Remote control
You can also pair the “switchBoxD DIN” controller to:
- rechargeable uRemote remote control
- sRemote battery remote control
- battery module for buttons – inBox
The remotes connect to the device directly via μWiFi (do not require a WiFi network to operate).
You can pair one remote control to many receivers, just like you can pair many remote controls to one receiver.
*In the case of residential areas over 50-70m^2 or in the case of switchgear located in the garage, or basement, please check the range of μWiFi remote controls in advance
Sensors - WiFi automation
Use BleBox sensors to control the “switchBoxD DIN” via WiFi network without running wires, for example:
- tempSensor to make control dependent on temperature
- airSensor to make control dependent on air quality
- rainSensor to make control dependent on rain
- windSensor PRO* to make control dependent on wind speed
- humiditySensor* to make control dependent on humidity
*soon
DIN rail mounting
BleBox controllers with the note “DIN” are intended for mounting on a DIN rail in a plastic distribution box.
In addition, the “switchBoxD DIN” controller is equipped with a built-in backlight that informs about the operating status and can indicate the connected load in color.
About the product
Specification
| Supply voltage: | 230V AC |
|---|---|
| Power consumption: | < 1W |
| Outputs number: | 2 |
| Outputs type: | relay, short-circuited to L, configurable: independent or push-pull |
| Maximum load: | per output: 5A (2x5A) |
| Maximum power: | per output: |
| Measurement range: | 0...2300W |
| Measurement resolution: | 1W |
| Type of measurement: | common (sum) for both outputs, current reading, total for the period, automatic calculation of the cost of consumed energy |
| Measurement history: | available online, resolution 5 min |
| Inputs number: | 2 |
| Inputs type: | optoisolated, logical, configurable, 12-230V AC / DC |
| Supported switches: | monostable (push-button), bistable (traditional, cross switch), not-illuminated |
| Number of built-in buttons: | 1 |
| Type of built-in buttons: | tact-switch, on / off function |
| Signaling on the housing: | color backlight |
| Housing type: | installation module DIN-1, width 17.5mm |
| Dimensions: | 90 (98.8) x 17.5 x 64.5mm |
| Protection Rating: | IP20 according to PN-EN 60529 |
| Housing: | ABS / acrylic, flammability class V-0 according to UL 94 |
| Mounting method: | direct mounting on a 35mm DIN rail according to PN-EN 60715 |
| Communication standard: | µWiFi, compatible with WiFi, 802.11g |
| Transmission frequency: | 2.4 GHz |
| Transmission type: | two-way, encrypted |
| API: | open (technical.blebox.eu) |
| Mode: | direct connection (as an Access Point), WiFi connection via a standard router, connection with access from anywhere in the world (only Internet access required) |
| Compatible devices and systems: | Apple iPhone, Apple iPad, iPad Mini, Android, computers and mobile devices supporting HTML5 |
| Operating temperature of the controller: | from -20°C to 50°C |
Shipping and Delivery Information
We aim to process and ship all orders as quickly as possible. Below is an overview of our shipping policy:
•Shipping Costs: Shipping costs will be calculated at checkout and are based on the size, weight, and destination of your order.
•Delivery Time: Orders are typically delivered within 1-5 business days. Please note that delivery times may vary depending on the shipping method selected and your location.
•Order Processing: We process orders Monday through Friday, excluding holidays. Orders placed on weekends or public holidays will be processed on the next business day.
•Tracking Information: Once your order has been shipped, you will receive an email with tracking details to monitor the progress of your delivery.
If you have any further questions regarding shipping, feel free to contact our customer service team.
